GaryM
|
| posted on 29/9/07 at 08:51 AM |
|
|
Automatic Zetec donor any good?
Hi
Would an engine out of an auto 1.8 Zetec Mk2 Mondeo be suitable for replacing a 1600GT Xflow (connected to a type 9)?
Cheers
Gary
|
|
|
|
|
coozer
|
| posted on 29/9/07 at 10:38 AM |
|
|
Should be, but you'll need the flywheel, sump and water pump from a 1.8 Escort to make it fit.
1972 V8 Jago
1980 Z750
|
|
|
jambojeef
|
| posted on 29/9/07 at 03:43 PM |
|
|
You also might need to have the spigot bearing that usually supports the clutch and flywheel pressed into that engine.
Engines with torque convertors dont usually have them fitted.
|
|
|
big_wasa
|
| posted on 29/9/07 at 04:27 PM |
|
|
And you will also need the crank position sensor housing from a manual aswell 
|
|
|
Werner Van Loock
|
| posted on 29/9/07 at 05:10 PM |
|
|
You also need the housing for the trigger sensor as it is different on the auto.
http://www.clubstylus.be
|
|
|
grusks2
|
| posted on 29/9/07 at 09:01 PM |
|
|
Im running a 2L auto engine -
I fitted a 1800 flywheel, spiggot bearing, new trigger housing ( the sensor is ok from the auto) the sump i had cut and shut.
I used an 18cvh sierra starter.
http://mac1worxbuild.wordpress.com/
forgot my old password so another username doh
|
|
|
