minordelay
|
posted on 14/5/09 at 02:12 PM |
|
|
Disposing of waste tyres (lots)
Hi
I've accumulated a quantity of scrap tyres from cars I've scrapped at the college.
Anyone know a company that will happily take them away for free. I know I can sneak them through the local tip/recycling centre but that will take too
long.
Thanks guys
Nigel
|
|
|
MK chippy
|
posted on 14/5/09 at 02:14 PM |
|
|
Hows about giving them to a farmer near you? they always seem to use them for weighting down tarps etc
|
|
tegwin
|
posted on 14/5/09 at 02:22 PM |
|
|
I dont think you can even take them to your local recycling centre... mine refused to take a pair of tyres
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
coozer
|
posted on 14/5/09 at 02:23 PM |
|
|
Pile them up in the yard and set fire to them.
1972 V8 Jago
1980 Z750
|
|
blakep82
|
posted on 14/5/09 at 02:27 PM |
|
|
when i got new tyres on my car i got charges something very small for environmental disposal.
will your local tyre place take them?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
speedyxjs
|
posted on 14/5/09 at 02:33 PM |
|
|
If you find your local tyre place (kwik fit etc), go there at night and just put it with the rest of theirs.
How long can i resist the temptation to drop a V8 in?
|
|
tomgregory2000
|
posted on 14/5/09 at 02:34 PM |
|
|
Find a skip and chuck them in it
|
|
contaminated
|
posted on 14/5/09 at 02:35 PM |
|
|
Tyres are banned from landfill disposal under the Landfill Directive - hence the problem. Any decent waste management company will come up with an
alternative for you. Have you got no local go-kart tracks or race circuits?
|
|
adithorp
|
posted on 14/5/09 at 03:40 PM |
|
|
Be aware that scrap tyres are controlled waste and as such you need a "waste carrier" licence to carry/move them. Not a problem for a
private individual to move a couple but "...tyres from cars I've scrapped at the college..." brings you under the law. As a producer
of waste you also need a "waste producer" licence to store them on site. There's also a maximum you can store legally.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
deezee
|
posted on 14/5/09 at 03:55 PM |
|
|
When I had to get rid of 4 tyres, I cut them up with a jig saw. Once in strips, they are pretty small. So i popped each tyre in a supermarket bag
and put them in my wheelie bin.
|
|
kipper
|
posted on 14/5/09 at 04:06 PM |
|
|
credential tyre recycling Sheffield
As the title really, there is a depot on the airfield where I work and dozens of lorries a day come here to tip
If you Google tyre recycling there are lots of carriers.
Denis.
Where did that go?
<<<<
|
|
Peteff
|
posted on 14/5/09 at 04:51 PM |
|
|
Nobody will take them away for free though, my local fitter charges £1 for disposal on top of fitting charge.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
madrallysport
|
posted on 14/5/09 at 05:29 PM |
|
|
As said before local farmers will take them of you
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
Front Row Joe
|
posted on 14/5/09 at 06:10 PM |
|
|
Knowing a couple of farmers (in Devon) I can tell you that most will laugh at you if you try and offer them tyres. They are in the same boat as
everyone else and want rid of the ones they have let alone acquiring more! My father in law has considered just about every option to get rid of
them. We came to the conclusion that you either have to pay to have them removed or deposit them 4 at a time at the local recycling centre!!
|
|
Simon
|
posted on 14/5/09 at 06:49 PM |
|
|
I agree with setting light to them, it's where you do it that counts.
I'd suggest the lobby of the H of P, to get all the slimy shites out on the street ready to be lined up!
ATB
Simon
|
|
minordelay
|
posted on 14/5/09 at 11:19 PM |
|
|
Wow, some good answers there. We have a tyre recyclers nearby but I know that will cost. Being located in a densely populated area there's sure
to be lots of others looking to offload tyres too!!!
A fire is obviously out of the question but they need to go more than ever now before we end up getting a licence.
Oh for a simple solution
|
|
liam.mccaffrey
|
posted on 15/5/09 at 12:20 AM |
|
|
when i lived in the states, i asked the bin men about putting stuff like this in our wheelie bins.
His answer was, and I quote "if it fits in the wheelie bin we'll take it"
over the next 6 weeks i disposed of an entire mazda mx5 shell in wheelie bin sized pieces, wheels/tyres included
[Edited on 15/5/09 by liam.mccaffrey]
Build Blog
Build Photo Album
|
|
sickbag
|
posted on 15/5/09 at 01:44 PM |
|
|
quote: Originally posted by minordelay
Wow, some good answers there. We have a tyre recyclers nearby but I know that will cost. Being located in a densely populated area there's sure
to be lots of others looking to offload tyres too!!!
A fire is obviously out of the question but they need to go more than ever now before we end up getting a licence.
Oh for a simple solution
Have you got a council estate nearby? There's bound to be a car fire on there that you could add your tyres to.
Finally back on the job!
|
|
DarrenW
|
posted on 15/5/09 at 02:48 PM |
|
|
How many are lots? i bet there are a few of you there with transport that could take a couple at a time and dispose of at local council tip.
Other than that get a number out of yellow pages and pay to get rid of them. Probs no other sensible options.
|
|
minordelay
|
posted on 15/5/09 at 05:19 PM |
|
|
The council tip is looking like the only option really. To pay to have them removed is possible just a little long winded and would involve
estimates(definately), contracts (probably) and long waits for multiple signatures. Thats why I'm looking for the easy option.
I've spent over two years waiting to get a set of corner weight gauges signed off.
Out with the jigsaw I think.
|
|