Autosri
|
| posted on 5/10/11 at 11:50 AM |
|
|
Pinto inlet Manifold gasket
Hi guys I'm looking to replace the intake manifold gasket on my pinto 2l it has a proper manifold to fit twin 40 dcoe webers on where could I
get a gasket or is it likely to be an original ford gasket
Thanks
|
|
|
|
|
melly-g
|
| posted on 5/10/11 at 12:09 PM |
|
|
I replaced mine 2 weeks ago! It's easy to get just the gasket from almost any motor factors.
Got mine from exhausts unlimited only £3 !!
|
|
|
JeffHs
|
| posted on 5/10/11 at 12:25 PM |
|
|
But check that the gasket doesn't partially mask the bores in the head. Mine from a local factor needed trimming to suit
|
|
|
Autosri
|
| posted on 5/10/11 at 12:46 PM |
|
|
So I should just ask for a standard ford gasket and that will fit a twin dcoe manifold
|
|
|
omega0684
|
| posted on 5/10/11 at 04:50 PM |
|
|
quote:
Originally posted by Autosri
So I should just ask for a standard ford gasket and that will fit a twin dcoe manifold
walk in and say "one pinto inlet manifold gasket please"  shouldn't cost you more than a couple of quid
here you go - Ebay Link
[Edited on 5/10/11 by omega0684]
I love Pinto's, even if i did get mine from P&O!
|
|
|
Autosri
|
| posted on 5/10/11 at 07:09 PM |
|
|
Thanks for the help guys got one on it's way to me for the weekend so will get it swapped out
|
|
|
