Trollyjack
|
| posted on 7/11/11 at 07:39 PM |
|
|
Over bored crossflow
Hi
I've just had my crossflow over bored to +0.060" Will I have to get a head gasget to fit a +0.060" bore or will the std head gasget
fit
Not yet got it home from the reborer Yet to check
TrollyJack
|
|
|
|
|
DixieTheKid
|
| posted on 7/11/11 at 08:15 PM |
|
|
head gasket shouldnt be much of a problem, what about the pistons?
COS IT'S Worth IT
|
|
|
stevebubs
|
| posted on 7/11/11 at 08:25 PM |
|
|
Call Wilcox and tell them what you're doing. I did this when rebuilding my xflow and they recommended which parts (gaskets, oil pumps etc) would
be most cost-effective and suitable for my engine. Their prices were pretty reasonable, too.
|
|
|
Trollyjack
|
| posted on 7/11/11 at 08:45 PM |
|
|
Got Pistons +0.060"
TrollyJack
|
|
|
DixieTheKid
|
| posted on 7/11/11 at 08:50 PM |
|
|
quote:
Originally posted by Trollyjack
Got Pistons +0.060"
So whats the total bore size?
Edit: Just seen that is a 1300 from your left hand thingy
<----------------------
[Edited on 7/11/11 by DixieTheKid]
COS IT'S Worth IT
|
|
|
steve m
|
| posted on 7/11/11 at 08:57 PM |
|
|
The head gasket is the same part, wether a standard or +90 overbore
Steve
|
|
|
DixieTheKid
|
| posted on 7/11/11 at 09:04 PM |
|
|
Standard bore size 80.978mm
You have + 0.060" = 1.524mm
So in theory you need a 82.5mm headgasket
linky or of course a cheaper
alterative
COS IT'S Worth IT
|
|
|
Trollyjack
|
| posted on 7/11/11 at 09:19 PM |
|
|
Thanks for linky
I'll get one
TrollyJack
|
|
|
DixieTheKid
|
| posted on 7/11/11 at 09:25 PM |
|
|
Your welcome.
COS IT'S Worth IT
|
|
|
