aidan46
|
posted on 20/11/11 at 04:52 PM |
|
|
ZX6R Throttle Bodies help
Hi I have a set of throttle bodies from a 2006 ZX6R . It has two sets of butterflies one a the top which is oval in shape then another set further
down which are regular round ones. (worked off the throttle cable) Just wondering whats the purpose of having the two sets?
Thanks
|
|
|
will121
|
posted on 20/11/11 at 07:54 PM |
|
|
Normally inner set is directly controlled by the throttle position with outer controlled by ecu but can't explain why
|
|
aidan46
|
posted on 20/11/11 at 08:44 PM |
|
|
Yeah the outer one seems to be attached to a motor on the end of the shaft. Could it be to do with the Idle air control?. Im in the process of putting
them on a zetec to be run with a megasquirt ECU.
|
|
will121
|
posted on 20/11/11 at 08:50 PM |
|
|
I've fitted gsxr throttle bodies on a zetec which also had twin butterflys I removed the outer ones and blanked them off
|
|
aidan46
|
posted on 20/11/11 at 09:01 PM |
|
|
Yeah I was thinking that might be the handiest thing to do!!
|
|
Rob Allison
|
posted on 21/11/11 at 02:27 AM |
|
|
You mean these butterflys
I've just removed them and plugged the side holes. There now on a zetec
|
|
aidan46
|
posted on 21/11/11 at 01:16 PM |
|
|
Yeah, thats them alright. Have you spaced them out a little to fit your manifold?
|
|
Rob Allison
|
posted on 21/11/11 at 02:19 PM |
|
|
Yes. About 45mm or so. Easy to do, just longer bolts to hold it together and spacers. Then extend the lever between the two for the throttle. The fuel
rail also needs extending.
|
|
aidan46
|
posted on 21/11/11 at 05:02 PM |
|
|
Thanks,
Sounds straight forward enough, except how is the fuel rail extended? do I need a new longer rail connector T piece?
|
|
Rob Allison
|
posted on 21/11/11 at 09:10 PM |
|
|
The pipe is 6 or 8mm i just cut and welded a piece in. but you could use copper tube and a T piece soldered in.
|
|
aidan46
|
posted on 21/11/11 at 09:52 PM |
|
|
Fair Play Rob thats great help.
|
|