geordielad
|
| posted on 4/12/11 at 12:35 PM |
|
|
mt75 gearbox starter relocation
is it possible to cut the stater motor housing off the mt75 & relocate it to where the original position of the mondeo and use the mondeo starter
motor, thus not having to modify the chassis to fit the gearbox
|
|
|
|
|
big_wasa
|
| posted on 4/12/11 at 01:46 PM |
|
|
Anything is posable with the skill and tools or money but either way its easier quicker and cheaper to move the chassis rail.
|
|
|
geordielad
|
| posted on 4/12/11 at 02:27 PM |
|
|
cant do that as i will lose my historic tax status
|
|
|
spiderman
|
| posted on 4/12/11 at 02:56 PM |
|
|
quote:
Originally posted by geordielad
cant do that as i will lose my historic tax status
Is it being fitted into your GT6? What motor are you fitting? I do not have any answers just being nosey.
I also have a MT75 gearbox which I am hoping to use in one of my cars sometime in the future, I also have a type 9 but I wanted to use that in my
locost but it may end up on the back of the GT6 motor.
Spider
|
|
|
big_wasa
|
| posted on 4/12/11 at 03:24 PM |
|
|
quote:
Originally posted by geordielad
cant do that as i will lose my historic tax status
Ah not a locost then.
It will not be easy.
|
|
|
geordielad
|
| posted on 4/12/11 at 04:31 PM |
|
|
its going into a 72 spitfire
[Edited on 4/12/11 by geordielad]
|
|
|
big_wasa
|
| posted on 4/12/11 at 06:18 PM |
|
|
I know "r1_pete" got one in to an mgb
 
Zetec in MGB 2
|
|
|
