needforspeed
|
| posted on 14/12/11 at 10:14 PM |
|
|
2007 r1 injector cc
hi i need to know what cc the injectors are in my 4c8 r1 before i can start mapping please help!
|
|
|
|
|
needforspeed
|
| posted on 14/12/11 at 10:25 PM |
|
|
this is what it says in the service book for part number and quantity denso 297500-1110/4
1110/4 quantity what??!!
|
|
|
Uphill Racer
|
| posted on 15/12/11 at 12:13 AM |
|
|
A G Bell's calks should give ball park figures.
HP x 4.6/number of cylinders = cc per min x 100/injectors per cyl x inj duty cycle.
|
|
|
needforspeed
|
| posted on 15/12/11 at 09:37 PM |
|
|
bump
|
|
|
needforspeed
|
| posted on 24/12/11 at 05:09 AM |
|
|
just incase anyone out there requires the same information i had these flow tested and came out at 320cc/min @ 3 bar which should be good for 356bhp
according to the emerald software! so happy days!
|
|
|
Uphill Racer
|
| posted on 24/12/11 at 11:20 PM |
|
|
quote:
Originally posted by needforspeed
just incase anyone out there requires the same information i had these flow tested and came out at 320cc/min @ 3 bar which should be good for 356bhp
according to the emerald software! so happy days!
I don't think Yamaha would have fitted such mismatched injectors.
320cc/min @ 3 bar with a 70% duty cycle are good for 195 bhp.
I would check your software calcs.
|
|
|
needforspeed
|
| posted on 25/12/11 at 08:03 AM |
|
|
sorry typo it comes out at 256bhp at 45psi in car fuel pressure how are you working it out?
|
|
|
Paul Turner
|
| posted on 25/12/11 at 09:08 AM |
|
|
330cc injectors are good for about 220 bhp at 95% using 3 bar fuel pressure, well they were in my Zetec.
|
|
|
Uphill Racer
|
| posted on 26/12/11 at 12:17 AM |
|
|
quote:
Originally posted by needforspeed
sorry typo it comes out at 256bhp at 45psi in car fuel pressure how are you working it out?
As I posted, how are you working it out?
|
|
|
Uphill Racer
|
| posted on 26/12/11 at 12:25 AM |
|
|
quote:
Originally posted by Paul Turner
330cc injectors are good for about 220 bhp at 95% using 3 bar fuel pressure, well they were in my Zetec.
220 bhp needs approximately 253cc/min @ 3 bar. At 80% 330cc injectors will flow 264cc/min.
If you use your car in anger pushing injectors past this value could destroy your engine.
|
|
|
needforspeed
|
| posted on 26/12/11 at 08:59 AM |
|
|
ok thanks appreciate your replys the engine made 203 previously and i think il struggle to find any injectors to replace them directly so if the
injectors are nearly maxing out il have to fit 4 more :-/
|
|
|
