adrianreeve
|
| posted on 3/3/12 at 01:54 PM |
|
|
Zetec crank breathing?
Do I need to use an oil catch tank for my zetec install, or can I blank off the bottom outlet and put a filter on the cam cover outlet? Seen both
done, but wondering which is best. It's a 2l Silvertop, standard apart from the Jenveys.
Cheers
Adrian
|
|
|
|
|
coozer
|
| posted on 3/3/12 at 01:59 PM |
|
|
I just run a bit of pipe to trawl on the floor....
1972 V8 Jago
1980 Z750
|
|
|
big_wasa
|
| posted on 3/3/12 at 02:00 PM |
|
|
If going for Iva its fround upon to vent oil vapour to the atmosphere and there for onto the road.
I have blanked the block and have a catch tank on the rocker breather.
|
|
|
macc man
|
| posted on 3/3/12 at 02:17 PM |
|
|
I used a T piece to allow both block and rocker cover to vent into a catch tank. I made it from an alloy drinking bottle from the pound shop. Bargain!
|
|
|
whitestu
|
| posted on 3/3/12 at 05:31 PM |
|
|
Both my block and cam cover breathers vent into the air filter backplate.
Never had any oil coming out of either, just a bit of vapour.
Stu
|
|
|
