adrianreeve
|
| posted on 13/3/12 at 11:07 AM |
|
|
Zetec feels like its firing on 3 when warm?
Following on from my other Zetec paranoia post, when I fire the engine up, it's lovely and revs really freely. However, it feels to me like when
it's warmed up, sometimes it's only firing on 3. It feels and sounds a little lumpy at idle, with a slight vibration.
The engine is running on a base map at the moment, so don't know if it just needs setting up properly? As always, any suggestions or advice much
appreciated!
Cheers
Adrian
|
|
|
|
|
coozer
|
| posted on 13/3/12 at 11:12 AM |
|
|
Plugs and leads are a bit susseptable to that. Put some new plugs in and make sure everything is tip top.
1972 V8 Jago
1980 Z750
|
|
|
RichardK
|
| posted on 13/3/12 at 11:17 AM |
|
|
Would also check for manifold leaks too.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
big_wasa
|
| posted on 13/3/12 at 11:34 AM |
|
|
Coils go down aswell
|
|
|
