thepest
|
| posted on 2/6/12 at 07:59 AM |
|
|
Xflow Clutch recommendations
As per subject, can anyone recommend a clutch/pressureplate/thrust bearing set?
|
|
|
|
|
kennyrayandersen
|
| posted on 2/6/12 at 12:32 PM |
|
|
bump -- I'm also interested in using a cross flow and any clutch pressure plate info would be appreciated
|
|
|
rusty nuts
|
| posted on 2/6/12 at 01:41 PM |
|
|
Which gearbox are you using?
|
|
|
kennyrayandersen
|
| posted on 2/6/12 at 03:29 PM |
|
|
4-speed E type 'rocket' (or so I'm told). I'm thinking of building a Buckland B3. I know it's not a 7, but I figure
there are probably quite a few folk here that know about the older Ford stuff. I'm trying to decide whether to go with the old 1.3 or 1.6
crossflow, or maybe hold out for the Ecoboost...
|
|
|
rusty nuts
|
| posted on 2/6/12 at 03:42 PM |
|
|
Rocket box should have a 1"x23 spline input shaft same as the type9 5 speed box . I used an early 1600 Sierra clutch kit with my type 9 and X
flow IIRC.
|
|
|
Dave Ashurst
|
| posted on 2/6/12 at 09:17 PM |
|
|
Depending on your needs and budget, AP Racing do a good range of clutch components.
|
|
|
thepest
|
| posted on 4/6/12 at 04:38 AM |
|
|
Thanks!
|
|
|
.jpg)
