johnemms
|
| posted on 25/3/14 at 01:57 PM |
|
|
Got it home 2.0L Engine
Got the 'Dirty Beast' home .. how the hell am I supposed to maul that into the garage!
 
It Arrives
 
Dirty Beast
Looks like getting filthy with the paraffin & big brush!
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
|
|
turnipfarmer
|
| posted on 25/3/14 at 02:54 PM |
|
|
Four castors bolted to a piece of wood - that's what I did.
|
|
|
big_wasa
|
| posted on 25/3/14 at 03:04 PM |
|
|
Big bit of wood and a mate then just carry it in.
I have carried one on my own. Not recommended for your back. .
[Edited on 25/3/14 by big_wasa]
|
|
|
DW100
|
| posted on 25/3/14 at 03:05 PM |
|
|
Unbolt as much as you can where it is. Things like the aircon pump and alternator will be about 5 kilos each.
Then get someone to help you lift it onto some sort of wheeled trolly
|
|
|
johnemms
|
| posted on 25/3/14 at 03:37 PM |
|
|
That was exciting!!
Piece of wood .. 2 of us..
On to a small trolley..
Wheels no longer round
Will strip off the rubbish over the next few days and move it to the bench ..
Should be a bit lighter by then 
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
pekwah1
|
| posted on 25/3/14 at 04:27 PM |
|
|
Stop being a weiner!! Walked mine across the floor into the garage on my own!
Get down the gym!
|
|
|
jacko
|
| posted on 25/3/14 at 04:42 PM |
|
|
Skate board
|
|
|
johnemms
|
| posted on 25/3/14 at 05:05 PM |
|
|
All the bits are coming off before I even think about moving it..
That was seriously heavy with all that junk !!
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
me!
|
| posted on 25/3/14 at 05:39 PM |
|
|
Interesting to see the 'proper' belt routing- I might get an auto tensioner and shift some stuff about!
I moved mine 200 meters down the road to a council garage on a sack truck. Got some strange looks!
|
|
|
johnemms
|
| posted on 25/3/14 at 06:00 PM |
|
|
Yeah .. I'm aware of the rotation of the water pump..
Its centrifugal so it 'can' run backwards but can cavitate & causes air locks at high speed..
Be nice to get it clean !!
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
ragindave
|
| posted on 25/3/14 at 08:53 PM |
|
|
Keep hold of the ribbed idler pulley it will come in very useful.
 
Zetec Pulley System
|
|
|
johnemms
|
| posted on 26/3/14 at 07:44 AM |
|
|
Going for something like this ..
 
Nice Solution
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
