tegwin
|
| posted on 13/6/15 at 01:39 PM |
|
|
What to use for Pinto Webber carb intake duct?
Im working on a van with a 2,0L pino engine in it. Has the standard twin choke webber carb on it. I want to attach a piece of ducting/tube onto the
top of the carb and run it to the front of the truck into a sock filter... Any idea where I can get a relativley cheap adapter to connect a standard
tube onto the carb at right angles?
[Edited on 13/6/15 by tegwin]
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
SteveWalker
|
| posted on 13/6/15 at 08:07 PM |
|
|
You mean this sort of thing
http://www.ebay.co.uk/itm/Webcon-UK-Weber-DGV-DGAS-Cast-Aluminium-90-Deg-Snorkel-Plenum-Kit-/351417657981?pt=LH_DefaultDomain_3&hash=item51d21fea7
d ?
|
|
|
tegwin
|
| posted on 13/6/15 at 08:28 PM |
|
|
Yup that sort of thing but not at that price 
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
Angel Acevedo
|
| posted on 13/6/15 at 11:58 PM |
|
|
CPVC Pipe Elbow?
It is kind of easily formed (deformed). Not sure if it will hold on the engine bay temperatures.
HTH
Beware of what you wish.. for it may come true....
|
|
|
snapper
|
| posted on 14/6/15 at 07:20 AM |
|
|
Metal K&N body, remove filter form aluminium attach metal concertina extractor ducting.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
rusty nuts
|
| posted on 14/6/15 at 07:35 AM |
|
|
Wouldn't have thought an elbow would be too difficult to make,?
|
|
|
.jpg)
