Matthew_1
|
| posted on 7/12/04 at 10:24 PM |
|
|
Zetec / Type 9 gasket
Does anyone know of anyone selling a sandwich plate to fill in the gaps when matching a type 9 to a zetec - otherwise I guess its the hacksaw and a
piece of 20swg ali ...
Cheers.
[Edited on 7/12/04 by Matthew_1]
|
|
|
|
|
givemethebighammer
|
| posted on 7/12/04 at 10:45 PM |
|
|
quote:
Originally posted by Matthew_1
Does anyone know of anyone selling a sandwich plate to fill in the gaps when matching a type 9 to a zetec - otherwise I guess its the hacksaw and a
piece of 20swg ali
I took the bell housing off to replace the gasket between it and the gearbox. While it was off I drew round it on to some ali sheet. I then took my
spare zetec block, lined up the gearbox mounting holes with the template I had just made from the bell housing and drew round this. It just worked out
from there. Pic attached (not mine but the design is identical.)
[Edited on 7/12/04 by givemethebighammer]
 
Rescued attachment adapter.jpg
|
|
|
dave69isit
|
| posted on 7/12/04 at 10:46 PM |
|
|
sqish plate
plate off pinto or cvh will fit
|
|
|
stevebubs
|
| posted on 7/12/04 at 11:31 PM |
|
|
Yup - I'm intending to use one of an 1800 CVH Sierra
|
|
|
Matthew_1
|
| posted on 8/12/04 at 09:52 AM |
|
|
Cheers folks - though finding a CVH gasket is proving impossible !
[Edited on 8/12/04 by Matthew_1]
|
|
|
saigonij
|
| posted on 8/12/04 at 05:59 PM |
|
|
do you really need it?
i have ran a few engines for a few years with the plate missing...
|
|
|
