Dick Axtell
|
 posted on 29/5/16 at 04:33 PM |
|
|
Bike Carb Filters - Advice Pls
Thinking of ditching the Pipex PX600 filter idea, in favour of fitting smaller, individual filters to each carb.
Has anyone gone down this route? If so, where did you source the filters? Any problems with this arrangement?
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
|
|
chris
|
| posted on 29/5/16 at 05:43 PM |
|
|
I found that any filter really restrics air flow
|
|
|
itsawindupuk
|
| posted on 29/5/16 at 06:33 PM |
|
|
I used a pair of ram air filters on my duratec with bike throttle bodies. Worked a treat, considered not using filters but I don't want to wear
the engine out in 10000 miles.
|
|
|
mcerd1
|
| posted on 30/5/16 at 12:07 PM |
|
|
In theory the individual filters won't give you as much power as the sausage filter 
the best option is meant to be a full airbox (like the bike had) then you can tune its size to iron out flat spots or boost the peak power or
torque... (obviously you need be able to position the filter to draw in cold air to make the most of this)
what ever you do - any changes will mean the carb's need retuned to get the best out of them
-
|
|
|
