luke2152
|
| posted on 30/6/16 at 08:37 PM |
|
|
who can make me a fuel rail
Need to get a fuel rail put together.
I could buy some of that extruded fuel rail stock - finding it online seems to be hard enough, and drill it myself (battery drill) but I have a
feeling that drilling needs to be more precise than that. Or at least the people selling the porting tools make it out to be like that.
Does anyone sell the fuel rail and drill it to your dimensions? Must be a wee easy job for a machine shop.
|
|
|
|
|
stevebubs
|
| posted on 30/6/16 at 11:21 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=119715&page=1
|
|
|
WallerZero
|
| posted on 1/7/16 at 06:39 AM |
|
|
I was also looking at this, unfortunately the costs for UK vs USA stock is just incredible! Plus then ensuring the spacing and injector bung spaces
are correct, you're looking at almost £100 all in if an engineering/machine shop did it (at that point I decided on a different approach that
may or may not work but will cost me nothing)
http://zachsgbszero.blogspot.co.uk/
|
|
|
r1_pete
|
| posted on 1/7/16 at 06:53 AM |
|
|
How long does it need to be, I have some off cuts from making my 6 cyl rails.
|
|
|
