r1_pete
|
| posted on 4/2/17 at 05:23 PM |
|
|
Cylinder boring reccomendation South Yorkshire
Its years since I had a block bored, can anyone reccomend a machine shop in the South Yorkshire area??
Cheers.
Pete.
|
|
|
|
|
arrow-engineering
|
| posted on 4/2/17 at 10:54 PM |
|
|
whats the job?
|
|
|
r1_pete
|
| posted on 4/2/17 at 11:03 PM |
|
|
A +20 thou rebore on a 3.5L Rover V8, possibly a crank grind too, but havent got that far in yet.
|
|
|
Tazzzzman1
|
| posted on 5/2/17 at 02:46 AM |
|
|
I can recommend G Blands in Barnsley. They did a rebore, head skim and hardened valve seats on my Pinto...really helpful.
51 Westgate, Barnsley, S71 2DS
|
|
|
Nickp
|
| posted on 5/2/17 at 07:24 AM |
|
|
Stanwood in Bawtry, very very good.
http://www.stanwoodengineering.co.uk/
|
|
|
40inches
|
| posted on 5/2/17 at 10:55 AM |
|
|
I found a place in Sheffield, although I can't remember who But by the time I added up the costs of the rebore for 8 cylinders,
the cost of the pistons, rings etc; It was cheaper to buy a known engine.
|
|
|
24vseven
|
| posted on 19/2/17 at 12:39 PM |
|
|
another vote for stanwood never had an issue with them
|
|
|
