Farnsy
|
| posted on 6/3/17 at 08:25 PM |
|
|
Saab Engine - BMW zf gearbox adapter
Hello, I have been looking for a while to find drawings of an adapter plate for a saab b204/BMW zf combo. Everywhere I look links to a website which
is now down. Is anyone able to help? ☺️
Thanks
|
|
|
|
|
Nickp
|
| posted on 6/3/17 at 09:49 PM |
|
|
Froggy on here will probably know, I'll msg him.
|
|
|
Farnsy
|
| posted on 6/3/17 at 10:06 PM |
|
|
Thanks 
[Edited on 6/3/17 by Farnsy]
|
|
|
froggy
|
| posted on 6/3/17 at 10:53 PM |
|
|
Can't help much but there's a guy on Facebook doing loads of different plates for rx8 boxes and he's doing a Saab -rx8 now . I got
my zf to Volvo plate from kl racing who list a Saab -Chevrolet one but nothing else
[IMG]http://i144.photobucket.com/albums/r187/froggy_0[IMG]
|
|
|
nick205
|
| posted on 7/3/17 at 09:28 AM |
|
|
farnsy - do you have photos of the engine and gearbox in question? With some visibility of them people on here may be able to help. Some have made
adapter plates from sheets of steel. Usually 10+mm thick so may require adaption of the crank shaft / clutch etc. Often you can draw a profile on a
sheet of cardboard (or chipboard) and have the steel laser or water jet cut.
|
|
|
froggy
|
| posted on 8/3/17 at 11:43 AM |
|
|
Go on saabworx page on Facebook and find mark nelson he's just had a batch of Saab zf plates made and I think they're £130
[IMG]http://i144.photobucket.com/albums/r187/froggy_0[IMG]
|
|
|
