Rena
|
| posted on 24/4/17 at 08:57 AM |
|
|
Manifold R1 carbs - throttle bodies?
Hi,
I have a DanSt manifold with R1 carbs for my Zetec.
Thinking of going the throttle bodies route next winter. To keep the costs down it would be nice to use my existing manifold.
Any throttlebodies that will fit on my manifold?
|
|
|
|
|
SJ
|
| posted on 24/4/17 at 02:21 PM |
|
|
The obvious answer is R1 throttle bodies.
Spacings should be the same so they should bolt straight up. As long as they have integral injectors you should be fine.
Stu
|
|
|
Rena
|
| posted on 24/4/17 at 03:33 PM |
|
|
quote:
Originally posted by SJ
The obvious answer is R1 throttle bodies.
Spacings should be the same so they should bolt straight up. As long as they have integral injectors you should be fine.
Stu
Are you sure?
|
|
|
redturner
|
| posted on 24/4/17 at 05:00 PM |
|
|
Dan will make adapters to fit.....
|
|
|
Rena
|
| posted on 24/4/17 at 05:08 PM |
|
|
quote:
Originally posted by redturner
Dan will make adapters to fit.....
Danst Engineering?
|
|
|
andygfc
|
| posted on 24/4/17 at 06:19 PM |
|
|
I have some 2000 gsxr 750 throttle bodies
Bought to put on zetec, will need spacing, but is quite easy.
I've gone bike engine
£150 inc p
|
|
|
redturner
|
| posted on 24/4/17 at 06:49 PM |
|
|
quote:
Originally posted by Rena
quote:
Originally posted by redturner
Dan will make adapters to fit.....
Danst Engineering?
Yes, thats his name, Dan Stanley.....
|
|
|
SJ
|
| posted on 24/4/17 at 07:10 PM |
|
|
There are certainly R1 TBs that are spaced the same as R1 carbs. Not sure they are all the same though - later engines may be different.
Stu
|
|
|
Rena
|
| posted on 25/4/17 at 04:12 AM |
|
|
quote:
Originally posted by SJ
There are certainly R1 TBs that are spaced the same as R1 carbs. Not sure they are all the same though - later engines may be different.
Stu
I have found out R1 carbs are like 76-78-82,5 mm C/C.
The throttle bodies from a R1 after 2004 är paired, so it should be bodies before 2004.
[Edited on 25/4/17 by Rena]
|
|
|
Rena
|
| posted on 25/4/17 at 06:30 AM |
|
|
quote:
Originally posted by andygfc
I have some 2000 gsxr 750 throttle bodies
Bought to put on zetec, will need spacing, but is quite easy.
I've gone bike engine
£150 inc p
Pics?
|
|
|
Rena
|
| posted on 25/4/17 at 06:31 AM |
|
|
quote:
Originally posted by redturner
quote:
Originally posted by Rena
quote:
Originally posted by redturner
Dan will make adapters to fit.....
Danst Engineering?
Yes, thats his name, Dan Stanley.....
He can offer me a new kit and parts, but not any adapters that will make it fit.
|
|
|
lsdweb
|
| posted on 25/4/17 at 07:12 AM |
|
|
I have a set of GSXR throttle bodies for sale - these are individual bodies so easily spaced. They are also single butterfly ones so no need to blank
off second butterflies etc.
 
Description
Link to for sale post
Wyn
|
|
|
