U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Engine & Transmission » Clutch slave Garage Equipment at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Clutch slave
davew823
Junior Builder






Posts 40
Registered 4/1/06
Location Michigan USA
Member Is Offline


Building: Locost Corolla GTS
posted on 24/1/18 at 12:03 PM Reply With Quote
Clutch slave

It sounds like all you need is just a slight increase in volume. You can try repositioning the master cylinder push rod on the clutch pedal. Probably would only require small adjustment to increase the stroke. You do not want to angle the M/C push rod more than 7* which will lead to a side load and higher wear or possible blinding. If that is not an option than you have to go up the next size M/C. dave w
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Engine & Transmission » Clutch slave go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.