johnnybizzle1986
|
| posted on 1/12/19 at 09:58 AM |
|
|
Clutch pressure plate
Hi All
I have a lightened ginetta GT5 flywheel on my zetec engine, it has a 215mm friction plate but no pressure plate, I have tried to track one down was
wondering if anyone could help.
The flywheel is 285mm standard diameter
3 pins at 218mm c/c between them
And has 215mm which fits my mt75 gearbox
Regards Jon
|
|
|
|
|
wonderfulweasel
|
| posted on 1/12/19 at 12:56 PM |
|
|
Precision clutch components will be able to sort you out.
I've no association, but have had good service from them recently.
I'll post up their details later when I get home.
|
|
|
big_wasa
|
| posted on 1/12/19 at 03:45 PM |
|
|
Has the flywheel got drilling’s for extra locating pegs ?
215mm is a pinto size. If it has other holes for locating pegs it would suggest it’s been redrilled for a pinto clutch.
Standard Zetec E is 220mm on the 1.8 and 240mm on the 2.0 and the 130ps 1.8 silvertops.
You can use a fwd clutch with the Mt75 but there is slightly less travel making the clutch a little on or of but not that bad.
With a fwd clutch and Mt75 there is a gap of 20mm between thrust bearing and clutch. Westfield glued a spacer to the thrust bearing. I’ve had two and
they work fine. Gbs use a longer clutch pivot pin. I’ve also seen a few other solutions.
With a pinto clutch there will still be a shortfall but not 20mm.
|
|
|
kingster996
|
| posted on 3/12/19 at 05:34 PM |
|
|
I have a light flywheel off a Ginetta on my Zetec. The pressure plate and clutch plate are off a mk1 Mondeo
One of these https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F333373738177
I used to be indecisive, but now I'm not so sure
|
|
|
johnnybizzle1986
|
| posted on 3/12/19 at 07:52 PM |
|
|
Great stuff thanks, il get one ordered
|
|
|
kingster996
|
| posted on 3/12/19 at 11:37 PM |
|
|
Not sure if it helps but here’s a pic of my Ginetta flywheel (weighs 3-4kg)
 
Description
[Edited on 3/12/19 by kingster996]
I used to be indecisive, but now I'm not so sure
|
|
|
