bi22le
|
| posted on 18/6/20 at 05:36 PM |
|
|
OMEX rolling road in SE London / Kent
Evening all,
As I have made some radical changes to my inlet (some I am not sure are the best moves forward) I want to get the car on a rolling road. My main
concern is air / fuel mix on the seperate cylinders.
It's been mapped and has run faultless for years but now I have a sealed inlet plenum which I think is boarderline too small in volume. This may
cause fueling imbalance across the 4 cylinders or serious power curve issues.
So I need to identify a half decent rolling road that knows OMEX that can check my power delivery and fueling on all 4 individual cylinders.
Thanks in advance.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
|
|
jeffw
|
| posted on 18/6/20 at 06:41 PM |
|
|
Atspeed in Raleigh in Essex. Speak to Omex for suggestions might be an idea.
|
|
|
bi22le
|
| posted on 18/6/20 at 07:53 PM |
|
|
I have sent AtSpeed an email for availability and will call OMEX tomorrow. TBH there won't be much mapping required unless it goes really wrong.
. . .
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
peter030371
|
| posted on 19/6/20 at 08:27 AM |
|
|
Second for ATSpeed. They did a great job on my Striker, it went in rough as nails and came out purring like a kitten. They advised against the roller
barrel TB I have as idle can be unstable but several years later it still idles perfectly 
I will be going back for a remap once my new head is finished and fitted 
edit to add I am also using an Omex ECU
[Edited on 19/6/20 by peter030371]
|
|
|
bi22le
|
| posted on 19/6/20 at 12:54 PM |
|
|
Yeah AtSpeed seem like winners, they are quite close to me, I pretty much pass their front door on the way to my Southend workplace!
I'm just waiting for some availability back, hopefully they can check the individual air/ fuel mix of each cylinder. I don't know how they
will do that though!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
