John G
|
| posted on 30/4/21 at 01:15 PM |
|
|
Stuart Taylor BEC clutch master cylinder
I have a Stuart Taylor Phoenix with a zzr 1100 engine. The clutch fluid has been going down and I need to replace the master cylinder. The only
markings are 14 with a diameter symbol , so 14mm bore and the letter N inside a circle. There are two mounting lugs on the side of the cylinder.
Will post a picture later. Any ideas on make or replacement?
|
|
|
|
|
BenB
|
| posted on 30/4/21 at 04:57 PM |
|
|
You sure it's not the standard one as shown here?
https://www.motorsloop.com/index.php?main_page=product_info&cPath=109_110_577&products_id=34696
I know on my ST BEC they just used the standard MC for the bike engine
|
|
|
John G
|
| posted on 30/4/21 at 05:28 PM |
|
|
Yes it looks like the one, many thanks
|
|
|
daviep
|
| posted on 30/4/21 at 09:05 PM |
|
|
I'm sure its obvious but just to be clear it's a rear brake master cylinder.
Davie
“A truly great library contains something in it to offend everyone.”
|
|
|
