big_wasa
|
| posted on 7/4/05 at 09:00 PM |
|
|
Enginering firms for zetec honne
I want to get the bores on my zetec lightly honned before the rebuild.
Does anybody no of a firm in the Boston/Spalding/Peterborough area...
Can anybody recomend ....Failing that ill have to buy my own...............
|
|
|
|
|
Volvorsport
|
| posted on 7/4/05 at 09:33 PM |
|
|
Nu line engineering in lincoln - is that close enough for you ?
do a top job and very competetive.
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
big_wasa
|
| posted on 7/4/05 at 09:40 PM |
|
|
about 45 miles ..Thanks if I dont find a closer firm Ill look em up.....
|
|
|
DavidM
|
| posted on 7/4/05 at 09:44 PM |
|
|
I've used Lindale engines at Peterborough. I think they do any stage of machining up to full rebuild.
Don't know what they'd charge for a honing session.
Proportion is Everything
|
|
|
ned
|
| posted on 7/4/05 at 09:45 PM |
|
|
why not just do it yourself? Buy a tool for the drill (sprung three paddle stone grinding thingy) and away you go. I've honed a bare vauxhall xe
block in the past as a complete beginner and it's not difficult...
Ned.
beware, I've got yellow skin
|
|
|
NS Dev
|
| posted on 8/4/05 at 07:17 AM |
|
|
He'll have seen the post but won't want to reply as it'd be advertising, so I'll do it!
Ask Dave Walker here on the forum, Newark Engines.
|
|
|
big_wasa
|
| posted on 8/4/05 at 07:48 AM |
|
|
Thanks for the help
|
|
|
