02GF74
|
| posted on 9/11/06 at 02:35 PM |
|
|
engine height
Anyone have data on engine heights - namely from axis of crank to top of engine (rocker/cam covers).
Or know how much taller duractec v6 is taller than 1300 xflow?
|
|
|
|
|
nick205
|
| posted on 9/11/06 at 03:06 PM |
|
|
RazMan might be able to help you with the height of a Duratec V6
|
|
|
RazMan
|
| posted on 9/11/06 at 04:02 PM |
|
|
I can do better than that 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
02GF74
|
| posted on 9/11/06 at 04:08 PM |
|
|
marvellous ... now for someone to find the same sata for xflow .... although I guess I can alwasy get the measure rule out 
|
|
|
ned
|
| posted on 9/11/06 at 04:20 PM |
|
|
crank line to rcker cover 15" for a xflow 17" for a pinto according to one of dave walkers old posts (though sadly the one where chrisg i
think it was measured loads down a scrappy has gone, think it was april 03 but it's not there anymore 
Ned.
beware, I've got yellow skin
|
|
|
bilbo
|
| posted on 9/11/06 at 06:20 PM |
|
|
This is a useful site for this sort of thing:
http://westfield-world.com/enginespecs_car.html
---------------------------------------
Build Diary: http://bills-locost.blogspot.com/
Web Site: http://locost.atspace.com
|
|
|
MikeR
|
| posted on 9/11/06 at 08:30 PM |
|
|
how accurate is that?
It says a Zetec is the same height as a K series and a crossflow is 110kg.
|
|
|
zetec7
|
| posted on 10/11/06 at 07:08 AM |
|
|
I don't know about the Duratec, but here's a drawing of the Zetec 2.0l from Ford...
 
Rescued attachment zetec1dims.jpg
http://www.freewebs.com/zetec7/
|
|
|
