dave-69isit
|
 posted on 18/6/07 at 08:40 AM |
|
|
main jet size
need to drill out main jets but dont no how big to go
|
|
|
|
|
iank
|
| posted on 18/6/07 at 09:00 AM |
|
|
Go on, give us a hint. Carb(s) engine+state of tune? (1.7 xflow?), current jet size?
Not that anyone can give you more than a guess, a good rolling road is the only way to tell for sure.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
dave-69isit
|
| posted on 18/6/07 at 12:23 PM |
|
|
jets
for xflow 1.7 big valve head zx6 carbs
[Edited on 18/6/07 by dave-69isit]
|
|
|
Surrey Dave
|
| posted on 18/6/07 at 01:11 PM |
|
|
carb size
What size are the carbs?
36mm ? 38mm? .
What size are the standard main jets?
No one can guess , but I'll be bold and make prediction that you will end up with something between 140 and 180.
You could also ask : Deckman001 I believe he has those carbs on his x-flow.
[Edited on 18/6/07 by Surrey Dave]
|
|
|
dave-69isit
|
| posted on 18/6/07 at 01:42 PM |
|
|
the carbs are 36mm
|
|
|
