U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Engine & Transmission » Pinto Dizzy 1.8 & 2.0 compatibility Air Compressors at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Pinto Dizzy 1.8 & 2.0 compatibility
Catpuss
Contributor






Posts 769
Registered 26/7/06
Location Leicester UK
Member Is Offline

Photo Archive Go!
Building: An MK Indy in red, very very red
posted on 22/6/07 at 07:37 PM Reply With Quote
Pinto Dizzy 1.8 & 2.0 compatibility

Well after dropping in my 2.0 engine I noticed the mechanical dizzy has a broken cap so I thought, why not install the 1.8 electronic one I have. This looks like it hasn't got that vacume connector thing to the carb but a 3 pin plug instead.

Being a bit clueless and the haynes manual being next to useless - can I just plop in the 1.8 + support electrics or do I need to swap anything else over too (e.g. carbs) ?
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Engine & Transmission » Pinto Dizzy 1.8 & 2.0 compatibility go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.