DarrenW
|
| posted on 29/6/07 at 02:18 PM |
|
|
ZX9R carb spacing
I buried this Q in my other post so may have been missed.
I have manifold for ZZR1100's with 75 - 85 - 75 spacing. Fitting TPS is hard so ive just found out a mate has some ZX9R carbs that have TPS
built in. Does anyone know if the spacing is the same?
Car runs weel at the mo om MJLJ in 2D mode, so if spacing is defferent rather than chuck the manifold i have i may continue with the ZZR's. Im
just a bit consciuos that not many people have used these on a Pinto and dont know why.
Cheers,
Darren.
|
|
|
|
|
jacko
|
| posted on 29/6/07 at 02:56 PM |
|
|
Darren my manifold is
80---90--80 mm
you may get away with yours with good rubbers
Graham
Ps i made my manifold for my carbs and had them setup at Bogg Brothers they were very helpfull no problems at all about the manifold
Graham
[Edited on 29/6/07 by jacko]
|
|
|
