whitestu
|
| posted on 9/3/08 at 01:18 PM |
|
|
ZX6R carb cold start device
Anyone know where it is on the carbs?
Thanks
Stu
|
|
|
|
|
bigrich
|
| posted on 9/3/08 at 03:29 PM |
|
|
its a series of 4 plungers linked by a metal operating linkage . linkage is on the engine side of the carbs and plungers are on the sides of the carb
bodies
Rich (2).jpg)
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
Guinness
|
| posted on 9/3/08 at 08:34 PM |
|
|
Have a look at this thread here:
http://www.locostbuilders.co.uk/viewthread.php?tid=75155
David found a link to a useful site that gives some useful details for bike carbs.
Also worth noting that bike carbs don't have a choke as such, they just open these "enrichment" plungers and let fuel pour in!
Mike
|
|
|
whitestu
|
| posted on 10/3/08 at 08:36 AM |
|
|
Thanks
I better get a choke cable then.
Stu
|
|
|
whitestu
|
| posted on 10/3/08 at 03:32 PM |
|
|
BTW, do you know what the small bore rubber pipes are for that go between the float bowls?
Thanks
Stu
|
|
|
