Gakes
|
| posted on 15/4/08 at 04:06 PM |
|
|
Need 2D or 3D drawing of any FWD golf engine and tranny
Need 2D or 3D drawing of golf any FWD golf engine and tranny. Even dimensions or measured sizes pls.
[Edited on 15/4/08 by Gakes]
 
Description
|
|
|
|
|
Delinquent
|
| posted on 16/4/08 at 08:16 AM |
|
|
Good luck with that Gakes!!!
I went through the "find cad engines and boxes" with my project, there are very, very, very few out there. In the end I had to settle for
finding / taking the best photo's I could of a given engine /box combo, getting a few key dimensions then doing it myself - I didn't go
into great detail on them, just rough blocks.
Another thing to look for is cross sectional pics and blueprints - that I had a larger degree of success with, but still didn't get much of what
I wanted. First step is usually to join marque specific forums and start asking...
|
|
|
