madteg
|
| posted on 17/4/08 at 07:26 PM |
|
|
Zetec locking pin (crank)
Does anyone know what it looks like so i can make one as this is one of those things you use once, and then put in bottom of toolbox and forget
about.
[Edited on 17/4/08 by madteg]
|
|
|
|
|
big_wasa
|
| posted on 17/4/08 at 07:50 PM |
|
|
taken from ebay.
|
|
|
madteg
|
| posted on 17/4/08 at 08:13 PM |
|
|
Do you know the measurements and size of thread, thanks kev.
|
|
|
jollygreengiant
|
| posted on 17/4/08 at 08:34 PM |
|
|
quote:
Originally posted by madteg
Do you know the measurements and size of thread, thanks kev.
Now the Kev me boy, if you ask me nicely and remember my stainless tubing you could borrow my locking kit AND if you ask me really nicely I might even
get the wife to drop it of at your house tomorrow. 
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
r1_pete
|
| posted on 18/4/08 at 07:28 AM |
|
|
After asking a similar question on here, I bought one of
THESE off fleaBay, at £15 all in it wasn't worth arsing about making one.
|
|
|
