blakep82
|
| posted on 15/6/08 at 12:06 PM |
|
|
wanted: vauxhall 2.0 16v to type 9 bellhousing
perhaps a long shot i know... but does anyone have one they'd like to sell me?
i see there's one on ebay so i'm watching that, but looking to see what else is around
its the 7 degree 153mm type
cheers 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
omega 24 v6
|
| posted on 15/6/08 at 12:45 PM |
|
|
why 7 degree???
If it looks wrong it probably is wrong.
|
|
|
blakep82
|
| posted on 15/6/08 at 01:45 PM |
|
|
they use the 7 degree one in racing, the racing engine mounts i've got already tilt the engine over by 7 degrees, the engines in the vauxhall
cars naturally tilt by 7 degrees normally anyway (but thats no real reason), and by tilting toward the exhaust it gives me a bit more space between
the engine and pedal box for my carbs and air filters/air box
in short, my car's already built for a 7 degree bell housing 
[Edited on 15/6/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
omega 24 v6
|
| posted on 15/6/08 at 02:27 PM |
|
|
Fair doo's
I think it'll be a more difficult housing to get on the second hand market though.
I used aframe engineering for my std one around 150 squids.
If it looks wrong it probably is wrong.
|
|
|
blakep82
|
| posted on 15/6/08 at 06:41 PM |
|
|
just emailed them, see if they do any 7 degree ones £140's good
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
NS Dev
|
| posted on 15/6/08 at 09:16 PM |
|
|
yukspeed will sell you a 7 deg one for that.
I sold my old 7 deg one out of my rwd pug 205 for £90
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
blakep82
|
| posted on 15/6/08 at 09:32 PM |
|
|
yukspeeds one's £170 now
well, when i said £140 was good, i meant better than yukspeed, or SHP sell them for...
£90 would have been even better!
well, maybe not for you...
[Edited on 15/6/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
blakep82
|
| posted on 16/6/08 at 07:06 PM |
|
|
anyone got one for sale on here?
no?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
