Dave Bailey
|
| posted on 2/7/08 at 03:58 PM |
|
|
Exhaust Manufacturer
I am at the point where I want to get an exhaust made on the car which means I need to trailor the car somewhere. Can anyone recommend an exhaust
manufacturer on the south coast near Portsmouth? I will need cat supplied also...
thanks
Dave B
|
|
|
|
|
Paul TigerB6
|
| posted on 2/7/08 at 04:41 PM |
|
|
will an off the shelf exhaust not fit from one of the various manufacturers?? What engine are you fitting??
|
|
|
Dave Bailey
|
| posted on 2/7/08 at 05:25 PM |
|
|
Focus st170 but i have lowered the motor a bit so not in std Zetec position... I want to bring 1 single pipe out of the side panel below the bonnet
line.....
Dave B
|
|
|
Dave Bailey
|
| posted on 4/7/08 at 09:17 PM |
|
|
I must be going mad...I'm sure there were more replies than this!
[Edited on 4/7/08 by Dave Bailey]
|
|
|
scutter
|
| posted on 4/7/08 at 09:29 PM |
|
|
For a custom job, Both Maniflow and Janspeed will do them up in Salisbury, a word of caution, Maniflow wanted £600 for a custom x-flow manifold in
2000
After that i can't help sorry, Dan
The less I worked, the more i liked it.
|
|
|
