sonic
|
| posted on 1/11/08 at 08:41 PM |
|
|
Big thanks to the guy's at Bogg Bros
As tittle really i had a great morning with the guy's sorting my car out on the rollers today,the car now runs very well.
Great lads excellent service and alot of enthusiam which is rare in garages these day's
thanks
|
|
|
|
|
jacko
|
| posted on 1/11/08 at 09:05 PM |
|
|
Mick which car ? MNR or the Pug
Graham
|
|
|
sonic
|
| posted on 1/11/08 at 09:16 PM |
|
|
Hi Graham
MNR sold the Pug
Runs like a dream and 177 BHP on there rollers,took 3 hrs to sort out the carbs were all over the place,wrong jets needles etc.
Cheers
|
|
|
goaty
|
| posted on 1/11/08 at 09:19 PM |
|
|
can i ask what engine and spec?
must of cost a bit for that long on the rollers.....
|
|
|
sonic
|
| posted on 1/11/08 at 09:34 PM |
|
|
2001 R1 bike engine
not as much as you may think,as i have said they are good guy's not the usual Dick turpins you see out there.
|
|
|
JoelP
|
| posted on 1/11/08 at 10:24 PM |
|
|
i had pretty much the same tale with Boggs Bros, the old chief sorted me out nice. Too cheap IMHO, cant make a living for what he charged me!
|
|
|
goaty
|
| posted on 2/11/08 at 09:49 AM |
|
|
hope you dont mind me chnaging the subject slightly. But what sort of money woudl i be looking at to sned some bike carbs to bogg bos and get the
rebuilt and a manifold made up??
thanks and sorry 
|
|
|
delboy
|
| posted on 2/11/08 at 10:21 AM |
|
|
I'd phone them and ask, when I enquired a few months back I think it was about £250 to have a manifold fabricated , and my R1 carbs stripped
cleaned and re jetted to suit my engine. They did quite correctly say that a rolling road session after my car is complete would be needed to get the
best out of the carbs though.
|
|
|
