Hi,
Am in the process of converting my Locost racer to run in the Magnificent Sevens. I am fitting a 4age 16v - therefore need an exhaust manifold to it
into a ST Locost if anyone has one!
Nik
07966 278388
[Edited on 23/2/11 by charliemouse]
i've got a standard manifold off a 16v 4age if thats any good?
I've got a twin 45 inlet manifold for the other side!
Put a wanted post up onto JPSC (Jeremy Phillips scorts cars) .org.uk That web site is a good source for info on 4age sevens and parts. Somebody may
have a standard exhaust left over from when they have fitted a high flow.
HTH
there is a guy on here selling a complete system if you search under the for sale section.
that guy would be me! I have a full Tony Law system sat in my garage. If you are interested let me know via u2u.
Here is the link with the pictures...
Thanks for the advice all.
I will place a couple more wanted.
Saw your ad for the Tony Law system. Unfortunately the striker system places the side pipe RIGHT ON the chassis rail. Remember the engine is offset in
a Striker (I am pretty familiar - we are the northern agents for RAW! And no - they dont have any exhausts either!). Also, 4 into 2 into 1 is good for
torque but no good for top end - more a road/hillclimb system yours.
Come on - someones gotta have one! Going to be making one from scratch if not and no time!
Charliemouse