Hi guys, I have a small amount of laser cutting I need doing, around 50 parts, mainly 6mm mild steel but some 304 and 316 stainless in 10-12mm
thickness.
I have gone and asked for some quotes from various places and only got one reply, most of the other people aren't interested with small quantity
work or haven't got back to me.
I have all .DXF drawings made and a list of materials and thicknesses.
All help appreciated.
Dave
I've used these guys with a £50 minimum cut price (plus materials), I know its waterjet but may also be applicable.
http://www.clydeviewengineering.com/
If you want to send me the drawings I can get a quote from my laser cutter, usually very competitive. What sort of time scale are you looking for?
My email is russbost at googlemail dot com
Give Graham an Email. great bloke and very, very competitive prices.
graham_noble@live.co.uk
I use him and I'm in France!
Can cut also if you want another price and delivery.
Hai, You can try to Bangalore or Thirupoore [ Coimputure ] , Chennai area.
Try laser eng . Cheap and quick in the past from my dxf files.
Thanks guys, I tried all the places you suggested, however my cheapest quote by quite a bit was from Doncaster Laser, some of the suggested places
were a bit better on the thicker stuff >10mm because doncaster had to use waterjet for that stuff which is more expensive.
Thanks for all the information though guys
Dave