Can anyone recommend me a fuel filter to use with my bike pump & carbs - something with 3/8" tails would be best (so as to match the pipe sizes on the carb's / pump)

I've got one of these to use as a pre-pump filter:
https://www.merlinmotorsport.co.uk/p/sytec-10mm-in-line-fuel-filter-ff-inl-6

its got a ~50 micron filter in it and I'm thinking a paper element (~10 micron) one would be preferable between the pump and carb's (I assume that won't have any adverse effects)
but I don't fancy buying something as expencive as one of these
https://www.merlinmotorsport.co.uk/p/sytec-bullet-fuel-filter-with-10mm-tails-inj-filt-a3


so any suggestions - something cheaper from an OE application would be nice

[Edited on 8/2/2018 by mcerd1]

What do the bike manufacturers fit?

A service item like that surely shouldn't be too expensive.

I ran a similar prefilter on an old GSX1100, carbed bikes don't normally run 2 filters, EFI is a different story.

I ran a plastic/paper filter, about £5, pre carbs with a standard bike filter pre pump.

Description
Fuel pump mounting, close up

quote:

---

Originally posted by 40inches
I ran a plastic/paper filter, about £5, pre carbs with a standard bike filter pre pump.

---

Hi,

I have used a glass cleanable one very similar to you 'pre-pump' filter.

Plenty on the bay with different size fittings that might suit you and not very expensive.

https://www.ebay.co.uk/itm/Washable-inline-chrome-glass-fuel-filter-3-8-Kit-cars-Motorbike-Classic-Car/332257743852?hash=item4d5c1ad3ec:g:JQsAAOSw9GhY mgZe

Hope this helps.

Len.

quote:

---

Originally posted by mcerd1

quote:

---

Originally posted by 40inches
I ran a plastic/paper filter, about £5, pre carbs with a standard bike filter pre pump.

---

Yeah, I've been looking for ones like that but can't find any with more than an 8mm tail

I've tried using 8mm hose on the pump and carb tails but its just not a good fit with the hose I can get hold of and is likely to just damage the hoes (the OE bike hose is a lot thinner and seems to have been stretched over the bigger tails)


if anything I know the 50 micron glass one before the pump is overkill, but thats the easy & cheap bit to sort out....

[Edited on 8/2/2018 by mcerd1]

---

quote:

---

Originally posted by 40inches
The black to red connector is a 10mm to 8mm reducer

---

Checkout my previous comment.

quote:

---

Originally posted by avagolen
Checkout my previous comment.

---

The great idea of the glass filter with a cleanable element is that you do not need to get new ones.