Hi all, It's been a long time and I am back on the GTS Panther after all these years.

I need to get a 2.0 Pinto exhaust manifold which goes over the rails. I have a side exit one off a robin hood but I don't think this is going to fit without hitting stuff.

Anyone know where I can get hold of one. The one place I can find is MK sports cars, my question is ... does anyone have one fitted who can tell me :

a) Do they come straight out, i.e. how high do I need to have he engine to clear the rails

b) whats the measurement from the cylinder head to rail (or to where the exhaust drops down outside the car) so I can see if it too will fit my GTS panther

Or if anyone has one knocking around they want to sell :-)

Many thanks, Andy

This was my mk if you look in my archives there I lots of photos that may help you
I sold the car so can’t help with sizes

[Edited on 12/7/24 by jacko]

Thanks, very helpful ... looks like there's plenty of clearance over the rail

Another MK Indy with the MK supplied over rail exhaust. Plenty of clearance and a hole cut in the bonnet.