speedyxjs
|
posted on 18/3/09 at 06:26 PM |
|
|
Is this worth £60?
Hopefully
thi
s link works. I asked for a price by email and he sys £60. Do you guys think its worth that?
How long can i resist the temptation to drop a V8 in?
|
|
|
hellbent345
|
posted on 18/3/09 at 06:27 PM |
|
|
cant see it, one needs to be a member
|
|
blakep82
|
posted on 18/3/09 at 06:27 PM |
|
|
nope doesn't work. what is it?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
Omni
|
posted on 18/3/09 at 06:28 PM |
|
|
Doesn't work. Need to be registered ![](/images//smilies/sad.gif)
|
|
speedyxjs
|
posted on 18/3/09 at 06:33 PM |
|
|
From the site
quote:
I have designed a new crank sensor bracket for AJ16 engines which
effectively increases the ignition timing by 5degrees under all
conditions. I have fitted this bracket to both my manual XJR6 cars.
Last weekend I measured some in-gear vehicle acceleration timings
using a laptop PC to log the vehicle speed signal from the
diagnostic plug using scan tool software. Below are the results of
my measurements. In each case the first figure is the time in
seconds to do the 20mph increment running std ignition timing and
95RON fuel. The second time is running with the extra 5degrees
ignition advance and 99RON fuel. If anyone wants any more
inofrmation about my bracket, please feel free to email me
directly. I think the results speak for themselves in terms of
demonstrating the performance benefit of this modification. It also
improves fuel economy by nearly 2mpg (imperial) so saves money too.
The bracket only took a few minutes to fit to my engine and could
be used on naturally aspirated versions of AJ16 engines too, in
X300 or XJS.
Gear 5th 4th 3rd 2nd
Gearing 30.1 23 16.4 11.3 mph/1000rpm
10-30
20-40 9.7 / 9.7 5.8 / 5.5 3.5 / 3.4 2.2 / 2.0
30-50 8.9 / 8.5 5.5 / 5.2 3.5 / 3.4 2.3 / 2.0
40-60 8.9 / 8.5 5.5 / 5.0 3.5 / 3.1 2.4 / 2.3
50-70 9.0 / 8.2 5.4 / 4.6 3.2 / 3.1
[Edited on 18-3-09 by speedyxjs]
How long can i resist the temptation to drop a V8 in?
|
|
dinosaurjuice
|
posted on 18/3/09 at 06:36 PM |
|
|
quote: Originally posted by speedyxjs
From the site
quote:
I have designed a new crank sensor bracket for AJ16 engines which
effectively increases the ignition timing by 5degrees under all
conditions.
[Edited on 18-3-09 by speedyxjs]
£60 for a peice of angle-iron? just no.
|
|
blakep82
|
posted on 18/3/09 at 06:48 PM |
|
|
ha ha ha er, no
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
stevebubs
|
posted on 18/3/09 at 06:58 PM |
|
|
may as well fit megajolt and not fit and fart around with std ign..
|
|
r1_pete
|
posted on 18/3/09 at 07:35 PM |
|
|
Just make your own mod to move the sensor round the crank by 6 degs.
|
|
MikeR
|
posted on 18/3/09 at 07:48 PM |
|
|
for a proper test - get him to do it again using just either 95 or 99 ron petrol!
If its using a crank sensor, its probably electronic ignition. If its electronic ignition there is a good chance (with it being an expensive engine)
that its got a decent knock sensor and will adjust the timing as needed automatically!
|
|
steve m
|
posted on 18/3/09 at 07:49 PM |
|
|
Interesting !
Does any one know how to do somthing similar with a k series ???
ooppps that dose not have a knock sensor
steve
[Edited on 18/3/09 by steve m]
|
|
JoelP
|
posted on 18/3/09 at 08:09 PM |
|
|
its as unscientific a test as he could possibly do, very unscrupulous, and im sure he knows its not scientific. The extra poke could be entirely from
the different fuel, and nothing to do with his bracket.
To be accurate, he should do 4 runs, with and without both (angle and fuel change), then he could categorically prove that his bracket maximises the
effect.
|
|
Paul TigerB6
|
posted on 18/3/09 at 08:20 PM |
|
|
No way would i want to advance my ignition timing by 5 degrees over what Jaguar spent millions of pounds working out. Ask the guy for a picture of his
pistons in a year's time and then see if you fancy giving him £60. If he gave me £60 i wouldnt fit his bracket!!
|
|
mark chandler
|
posted on 18/3/09 at 08:34 PM |
|
|
As the car is designed to run on 95 ron then a bit more advance should help, but £60 for a bracket..... no way.
|
|
westf27
|
posted on 18/3/09 at 09:27 PM |
|
|
Buy one,paint yourself pale yellow,copy it and sell them on Ebay
555
|
|
speedyxjs
|
posted on 19/3/09 at 07:19 AM |
|
|
quote: Originally posted by westf27
Buy one,paint yourself pale yellow,copy it and sell them on Ebay
I get alot of advice from there as i do here and i could see it turning ugly
How long can i resist the temptation to drop a V8 in?
|
|
filiperosa
|
posted on 24/3/09 at 03:34 PM |
|
|
too expensive
|
|