Blackcab
|
| posted on 2/8/09 at 06:34 PM |
|
|
Binned pinto plan - heading Zetec
After a lot of thought I have decided to go down the Zetec route for my MK.
I a going to get a new engine from Kit parts or similar - has anyone got a good build diary of a zetec in to an MK
Also be interested if anyone is running a stock engine as appose to bike carbs etc
As a result I will be selling the pinto, Carb ( Single Webber ), Zorstec 4 to 1 exhaust ( unused ), and a few other bits I dont need - so if you need
anything let me know.
The pinto is a 165 block - EMAX, whilst it looks in good condition I have never heard it run so would prefer to sell it as a non runner.
Cheers
|
|
|
|
|
l0c0st
|
| posted on 2/8/09 at 06:41 PM |
|
|
Where are you? I could be interested in the pinto depending on location, and price obviously
|
|
|
jacko
|
| posted on 2/8/09 at 06:44 PM |
|
|
dunk3 is fitting a black top zetec he will be able to help you have a look in his photos
Jacko
|
|
|
Blackcab
|
| posted on 2/8/09 at 06:52 PM |
|
|
quote:
Originally posted by l0c0st
Where are you? I could be interested in the pinto depending on location, and price obviously
Im just up the road from you in Wakefield, I have attached some pics and if your interested make me an offer.
Was going to put carb and Exhaust on ebay - but if you want them too just let me know.
|
|
|
big_wasa
|
| posted on 2/8/09 at 06:53 PM |
|
|
There are a few on here that can wire up the standard ford ecu.
Ive done four pre pats and two pats 1 ecu's.
http://www.youtube.com/watch?v=Pxq4ks2Us_U
They have good and bad points.
Do you like wiring ? as the pats 1 ecu has 104 pins 
Give me a shout if you want to know any more.
|
|
|
Blackcab
|
| posted on 2/8/09 at 06:56 PM |
|
|
quote:
Originally posted by big_wasa
There are a few on here that can wire up the standard ford ecu.
Ive done four pre pats and two pats 1 ecu's.
http://www.youtube.com/watch?v=Pxq4ks2Us_U
They have good and bad points.
Do you like wiring ? as the pats 1 ecu has 104 pins
Give me a shout if you want to know any more.
Hate wiring - hopeless at it, was going to call in the help of fellow indy builders, auto electricians, a BBQ at mine and free beer
|
|
|
Blackcab
|
| posted on 2/8/09 at 07:10 PM |
|
|
quote:
Originally posted by jacko
dunk3 is fitting a black top zetec he will be able to help you have a look in his photos
Jacko
Cheers for that - he is only a few miles away
|
|
|
big_wasa
|
| posted on 2/8/09 at 07:58 PM |
|
|
It took me 40+ hours to get through the loom.
To this stage
http://www.locostbuilders.co.uk/upload/DSCF0732.JPG
Thats one long bbq
|
|
|
200mph
|
| posted on 2/8/09 at 08:17 PM |
|
|
i am selling a brand new 2 litre blacktop which is still packaged. Originally bought from kitcarparts / great british sportscars, I'm selling st
slmodt £100 saving vs online price.
Cheers
mark
If it isn't broke, fix it until it is
|
|
|
Blackcab
|
| posted on 2/8/09 at 08:22 PM |
|
|
quote:
Originally posted by big_wasa
It took me 40+ hours to get through the loom.
To this stage
http://www.locostbuilders.co.uk/upload/DSCF0732.JPG
Thats one long bbq
Is that going down the EFI route or TB route - looks to be a lot there
|
|
|
Blackcab
|
| posted on 2/8/09 at 08:27 PM |
|
|
quote:
Originally posted by 200mph
i am selling a brand new 2 litre blacktop which is still packaged. Originally bought from kitcarparts / great british sportscars, I'm selling st
slmodt £100 saving vs online price.
Cheers
mark
Richard at GBSC has said he will do me a deal on one because I am buying a few other bits from them, I would prefer to buy it from them just in case
there is anything wrong at least I have a bit of come back - sorry mate
|
|
|
big_wasa
|
| posted on 2/8/09 at 08:36 PM |
|
|
That runs the standard efi. It gets even more involved if you try to run Tb's with it.
If your iva ing it then go bike tb's and megasquirt if on a budget or Jenvey and omex if your not.
|
|
|
Blackcab
|
| posted on 2/8/09 at 08:45 PM |
|
|
Going Jenvey TB plus either omex or emerald ECU, I am on a budget but want it to be as good as I can get it at the same time, even if it takes a bit
longer to build
|
|
|
austin man
|
| posted on 2/8/09 at 10:19 PM |
|
|
Why buy brand new zetecs are good for 150k if serviced, average yearly us of a kitcar is 3 to 5k buy a low mileage second hand unit for £200 -£250. Im
running a 76K silvertop on webbers and it goes like stink. Pointless buying new unless your going for a new build plate. Use your savings to buy a
good ECU and map it to hell
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
Blackcab
|
| posted on 2/8/09 at 11:45 PM |
|
|
can get a new unit for £600 ish all nice and shiny - seems worth the difference to me - Im a bit of a perfectionist with stuff and have been saving up
for years so budget will stretch to it
|
|
|
lotusmadandy
|
| posted on 3/8/09 at 08:37 AM |
|
|
I bought a 1.8 silvertop for a tenner.
when i opened it up it was still almost new
inside.
Its going in my car shortly.
Andy
|
|
|
Blackcab
|
| posted on 3/8/09 at 04:08 PM |
|
|
All sorted now - New 2.0 Zetec, Jenvey TB and emerald ecu .... wifes jewellery on ebay to pay for it - but I think its what she would have wanted
|
|
|
.jpg)
