djtom
|
| posted on 10/1/12 at 12:08 AM |
|
|
R1 exhaust, fabric roof, springs and mondeo clutch FS
Mondeo clutch for a 1.8l zetec flywheel, 1”x23spline. Brand new and unused, came with a flywheel I bought. Made by Borg and Beck so a decent make, not
pattern crap.
£30 posted.
 
mondeo clutch 2
Waterproof fabric roof with rear window and ¾ windows. Originally from my Tiger Super Six, it’s no use to me now since I fitted a full cage as it
won’t fit over the top! In good condition with no rips or tears, it attaches with fabric poppers and would probably fit most standard sized 7-type
cars with a bit of work.
£80 posted.
(Sorry for the crappy photo, it was raining and dark so I couldn't photograph it outside!)
 
roof 1
Pair of 2.25” springs, 11” long, standard from the front of a Tiger Super six, so 250lb I think. Reasonable chrome but a bit pitted in places, should
polish up if you care about such things...
£25 posted.
 
springs
7” Chrome headlights with sealed beam units. Chrome, reasonable condition, light up when you connect electrickery to them. Not sure what else to say
really!
£35 posted.
(No photos of these, but imagine big round chrome headlights and you won't go far wrong!)
R1 carbon exhaust, baffles removed so it's now a straight through can. Much more free flowing than standard, probably a lot noisier as well! I
modified it but then never used it due to a change of plan.
£55 posted
 
r1 exhaust1
Collection welcome on all of the above.
Tom
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
owelly
|
| posted on 10/1/12 at 05:07 AM |
|
|
U have U2U ref headlights.
http://www.ppcmag.co.uk
|
|
|
djtom
|
| posted on 10/1/12 at 11:14 AM |
|
|
Headlights sold to Mr O subject to payment.
|
|
|
blakep82
|
| posted on 10/1/12 at 12:58 PM |
|
|
just out of interest, what diameter is the clutch?
my car uses a sierra clutch on a vauxhall engine, but just wondering if this would be a worthy replacement in coming years (current clutch is new)
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
djtom
|
| posted on 10/1/12 at 01:09 PM |
|
|
I think it's 220mm dia. Not sure it'd be any improvement on a sierra clutch though, if you want to upgrade have a look at the other clutch
I have for sale in my other thread!
Tom
|
|
|
blakep82
|
| posted on 10/1/12 at 01:27 PM |
|
|
ah cheers. think mines 215mm?
wasn't so much an upgrade, but rather when mines needs to be replaced, i imagine sierra ones will be harder to find, mondeo ones should be
easier to get hold of
that other one does look pretty sweet though! maybe i will look to lighten flywheels and upgrade the clutch in later years. first things first, get
this car built and on the road...
[Edited on 10/1/12 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Murphy
|
| posted on 13/1/12 at 09:12 PM |
|
|
U2U
Sent a U2U.
|
|
|
djtom
|
| posted on 22/1/12 at 11:50 PM |
|
|
Roof dimensions as follows (all a bit approx, it's a bugger of a thing to measure!)
 
roof dimensions
|
|
|
