designer
|
| posted on 26/11/12 at 09:35 AM |
|
|
CNC wood cutting
Anybody on here have any contacts that can CNC cut 9mm ply/MDF?
|
|
|
|
|
melly-g
|
| posted on 26/11/12 at 10:35 AM |
|
|
I know a place that does it, they're called Farr formes in Kings Lynn Norfolk.
I have used them for work but don't actually know anyone there!
|
|
|
trextr7monkey
|
| posted on 26/11/12 at 10:42 AM |
|
|
we have a cnc router that wlil do mdf but the table is smaller than A3
hth
Mike
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
dickie b
|
| posted on 26/11/12 at 11:33 AM |
|
|
these guys are just down the road from me - they make the Retoga sports car as a sideline to their main business
www.kellforms.com
well worth a look
|
|
|
tegwin
|
| posted on 26/11/12 at 01:03 PM |
|
|
What is it you need? I might be able to lasercut for you.
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
bi22le
|
| posted on 26/11/12 at 01:16 PM |
|
|
Damn I thought this was a post about DIY build your own CNC router or cutter. I want to make one. . . .
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
