ttalps2000
|
| posted on 23/10/17 at 08:44 AM |
|
|
Rolling Roads in Hampshire/Dorset
Can anyone recommend a rolling road Hampshire or Dorset areas that know how to tube webers and are willing to tune/map Megajolt?
I am based in Southampton, so nearer to me the better!
Thanks
|
|
|
|
|
nick205
|
| posted on 23/10/17 at 09:12 AM |
|
|
Hello,
I've used a rolling road near Winchester before with very good results. The owner/operator has been at it for many years and tuned a Weber carb
very well for me. Let me know if it's of interest and I can share the details with you.
|
|
|
Jenko
|
| posted on 23/10/17 at 09:12 AM |
|
|
I've used Tom a few times.....Really, really knows carbs.
Tom Airey
MY BLOG - http://westfieldv8.blogspot.co.uk/
|
|
|
nick205
|
| posted on 23/10/17 at 09:22 AM |
|
|
This is the website...
http://www.aireytuning.com/
|
|
|
nick205
|
| posted on 23/10/17 at 09:23 AM |
|
|
Look at that - two recommendations for the same one!
|
|
|
ttalps2000
|
| posted on 23/10/17 at 09:29 AM |
|
|
I have been thinking of Airey tuning, but he does state he will not touch injection etc, so assuming he will not be interested in the Megajolt side of
things. Will give him a call.
|
|
|
nick205
|
| posted on 23/10/17 at 09:50 AM |
|
|
Give him a call first - he's very straightforward and will certainly tell you if he can do what you're looking for.
|
|
|
Jenko
|
| posted on 23/10/17 at 11:59 AM |
|
|
As long as you have your lap top with the MJ software on it and it's all working, Tom can probably do something with it.
MY BLOG - http://westfieldv8.blogspot.co.uk/
|
|
|
nick205
|
| posted on 23/10/17 at 12:35 PM |
|
|
ttalps2000
If you decide to go to Tom it can be tricky to find - you're welcome to U2U me for help with directions.
|
|
|
FatChapChipChop
|
| posted on 23/10/17 at 12:44 PM |
|
|
I've used Tom Airey at least 4 times over the last 10 years I reckon. Very good with carbs but be aware he drills jets. Nowt wrong with that but
it means the identification by others after he's done his thing is near impossible unless you get him to write down what he's done.
He'll deal with an ignition map if you can drive the software alongside him. He'll shout instructions "up a degree, down a degree
.." which is fun when on the rollers at speed .. 
Airey can also be rather expensive, but he is very good.
I have also used Ray West .. http://www.west-tuning.com/ .. He's at Thruxton circuit and deals with all the touring cars when they roll up to
race. He did my Striker when Airey wasn't available and did a great job, and he can use your software as he's used to just about every
system that's out there.
Ray is a little on the expensive side, but is also very good.
Cheers !!
Drive fast, don't look back!
|
|
|
ttalps2000
|
| posted on 23/10/17 at 02:59 PM |
|
|
thank you for all the suggestions. Looks like Airey Tuning is at the top of the list then!
|
|
|
DanP
|
| posted on 24/10/17 at 08:16 PM |
|
|
I'd be interested to know your experience as I have a weber 500 and megajolt and I've not had much luck finding people who will work with
that combination.
Cheers,
Dan
|
|
|
Ugg10
|
| posted on 24/10/17 at 08:28 PM |
|
|
Lloyd developments are in Warminster so not too far away. They deal with emerald and canems and specialise in TVR upgrades also have a hub Dyno. Not
used them but we’re quick and useful anwpswering Email enquiries.
http://www.lloydspecialistdevelopments.co.uk
---------------------------------------------------------------
1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog - http://Anglia1968.weebly.com
|
|
|
ttalps2000
|
| posted on 25/10/17 at 07:26 AM |
|
|
I have previously used Slark racing who know webers and megajolt very well. However, they have now moved to Bristol from Salisbury, so not local ish
any longer!
|
|
|
robocog
|
| posted on 25/10/17 at 06:50 PM |
|
|
JKM are worth a call
They are in Portsmouth and a good bunch
I know they have worked on a megasquirted 7 and got good results (Chippys car)
Whether they want to go near megasquirt again I do not know 
Not sure if they "do" carbs though, I would suspect not
|
|
|
ttalps2000
|
| posted on 26/10/17 at 12:12 PM |
|
|
JKM appear to be the usual fuel injection re-mapping only outfit!
Spoken to Airey Tuning and he wont touch anything that needs a laptop, so that's that out!
Back to Slark Racing in Bristol by the looks of it!
|
|
|
.JPG)
