Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Pinto air filters for a twin choke Weber
Jon Christie

posted on 17/8/21 at 07:02 PM Reply With Quote
Pinto air filters for a twin choke Weber

On the last legs of my Haynes build and have a 1600 pinto engine and know I have to have the air filter through the bonnet but I have a new twin choke Weber and I would like to have pictures with advise on the best way and type of filters to use and if possible the make ie K N or piper cross.
Looking forward to here any advise.
Many thanks

View User's Profile E-Mail User View All Posts By User U2U Member

posted on 18/8/21 at 07:13 AM Reply With Quote
There is an adaptor that fits on the carb which should fit under the bonnet that you can fit a pipe to and run to the nose cone and fit a larger cone filter but if you want to go through the bonnet then foam filters by Pipercross or Ramair would be preferable to the metal K&N type as there is more filter area.

I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member

posted on 19/8/21 at 03:41 PM Reply With Quote
By twin choke Weber do you mean a Weber DGAV / DGV carb?

If so I ran a 2.0 Pinto in my MK Indy with a Weber DGV carb. A whole through the bonnet and a K&N filter on top of the carb.

View User's Profile View All Posts By User U2U Member

New Topic New Reply

go to top

Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.