Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Replacing a Chassis - I don't want to be a ringer!
bi22le

posted on 2/12/21 at 08:40 PM Reply With Quote
Replacing a Chassis - I don't want to be a ringer!

I had a quick search on here and couldn't find much but I know I have read bits and bobs on this topic.

My striker is starting to show it's age. As a strip down and rebuild project it's perfect. Everything works fine and on the button but powder coat is flaking off, built up dirt in hard to reach places etc means it needs a full strip down, check over and rebuild.

I'm not that guy though. I have a tiny garage and reall enjoy modifications and driving not massive building from scrath jobs.

So I am thinking of buying a rolling Chassis which is currently up for sale. Not completed and not registered. I'm half thinking of taking my Chassis plate off of my car and putting it on this one. New Chassis, better condition etc. This is ringing though and I am an honest person.

Trigger broom come to mind. Especially with my car.

What would you lot do?

There is always the option of just selling my whole car and buying something completely different. I like strikers though and they don't come around that often.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
Mr Whippy

posted on 2/12/21 at 08:57 PM Reply With Quote
No just swap the chassis and restamp the number. Was it stolen? No. Is it a dangerous dodgy insurance job? No... What's the problem.

Just do it and enjoy the car. You might even have it ready for the summer.

An alternative that might be cheaper would be to get the chassis blasted and repaired, I can't see much needing replaced.

View User's Profile Visit User's Homepage View All Posts By User U2U Member   Mr+Whippy 's Aim
ReMan

posted on 2/12/21 at 10:40 PM Reply With Quote
No its not ringing, but I dont get how if your not the guy to strip your car to refresh/blast/ paint the chassis, how replacing it completely is any different?





www.plusnine.co.uk
∙،. ˘≈ﺣ

View User's Profile Visit User's Homepage View All Posts By User U2U Member   ReMan 's ICQ status
Charlie_Zetec

posted on 2/12/21 at 11:07 PM Reply With Quote
Big thing in the Land Rover world, especially when it comes to Defenders - I should know, I've done one! I purchased a new galvanised chassis, as a direct (but new) replacement for the rotten item residing underneath my TDi 90. The new one didn't come with any chassis numbers stamped on it, so I took the approach of stamping my existing number on, and then cutting the outrigger off the old chassis (where the VIN is stamped) before cutting the rest of it up and weighing it in as scrap.

Some might argue that this makes it a new vehicle, but I'd argue it's no different than changing any other worn part out. I feel, and this is only my opinion, that "ringing" is where you're trying to disguise, alter or amend the original identification of a vehicle - which I'm not.

In your case the replacement rolling chassis is second hand, but I'd take the view of cleaning it up and refreshing it to an "as new" condition, and stamping your ID onto it. As long as the original is destroyed so there's no chance of it being re-used or re-surfacing at any point, I don't see an issue.

The IVA manual or DVSA registration guidelines might state differently, so I'd also have a quick read up before making any firm decisions....





Artificial intelligence is no match for natural stupidity!

View User's Profile View All Posts By User U2U Member
snapper

posted on 3/12/21 at 07:33 AM Reply With Quote
You can buy heritage body shells for MGBs, chassis for Triumph Herald and Spitfire etc so not an issue as you are replacing like for like IMHO.
Legally you have not scammed anybody, not put a Dutton back on the road, I wouldnt loose sleep over it.





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
russbost

posted on 3/12/21 at 11:16 AM Reply With Quote
I think it depends on EXACTLY what the OP is proposing.

If he buys another chassis, does a full strip & rebuilds onto the other chassis I think it is probably OK, tho' a grey area as this is presumably NOT a new chassis

However, if you take an existing rolling chassis & simply swap engine & box then when you swap the VIN you're effectively ringing it - tho' would agree not in any normal sense of the word

In either case, unless this is a VERY complete rolling chassis you are beack to the scenario of pretty much a full rebuild which is exactly what you wanted to avoid

Stripping an existing car into manageable "lumps" ie suspension, complete corners, engine/gearbox as one, steering rack & column, wiring all left attached to engine if possible etc. isn't actually THAT much work, a w/e to strip, a w/e to strip/repair chassis & another to repaint as required & probs 2 w/e's to put it all back together, refurb'ing a few bits along the way. I guess alot depends on how easily you can allocate half a dozen w/e' within a reasonable timeframe

Xmas is coming, if you have a couple of weeks off, easy peasy, job's a good 'un!





Furore Formula Car - the only two seater modern Formula Car lookalike. I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member   russbost 's Aim
cliftyhanger

posted on 3/12/21 at 11:23 AM Reply With Quote
To be "corect" you should only replace a chassis with a brand new replacement, which shouldn't be different. Eg the landrovers, 2CVs etc etc.

Spitfire and herald chassis have not been generally available for 30 years or more. A few turn up, along with some college demo chassis. And they get used to rebuild cars. Throughout the 90's and early 2000's a few specialists could supply reconditioned chassis on exchange. Technically naughty, but not breaking teh spirit of the rules.
When I built my spitfire, I dismantled a coupe of cars. When it came to building, I honestly could not tell which chassis was which. Did I worry? of course not. I only had a registration of one of the cars, which I have used. (the earliest mkIV spitfire commission number in the UK, as it trns out. Built with no regard for originality! St170, T9 box, Subaru diff. But eb=nough parts to scrape the 8 point rule)

View User's Profile View All Posts By User U2U Member
SteveWalker

posted on 3/12/21 at 01:55 PM Reply With Quote
quote:
Originally posted by russbost
If he buys another chassis, does a full strip & rebuilds onto the other chassis I think it is probably OK, tho' a grey area as this is presumably NOT a new chassis



A rolling chassis could be anything from a part-built car (new chassis that has never been on the road), so should be fine, to a heavily used car, ready to be stripped for spares, so definitely not. A grey area would be a chassis that had never been registered for the road, but maybe used on a few track days.

View User's Profile View All Posts By User U2U Member
bi22le

posted on 4/12/21 at 12:53 PM Reply With Quote
Thanks for everyone's thoughts.

I'm currently talking to someone to buy their brand new unused rolling chassis. So it will be fully fitted with all new bits (essentially the same as a full on refurb) and never seen daylight.

For me, and seeing the general opinion on here, is that this is a full on refurb and ok. The new chassis is unstamped and not registered.

My old Chassis will have the VIN ground off and sold without any documentation, so it can't be reused on the road. Not with MY registration anyway.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
bi22le

posted on 4/12/21 at 03:40 PM Reply With Quote
Well that offer fell through so now I'm back to reconditioning my chassis for now untill a decent spec striker chassis or complete car comes along.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
nick205

posted on 4/12/21 at 05:29 PM Reply With Quote
Interesting thread.

To the OP:

If you're going to strip the car you've got back to a bare chasis could you find someone to do the "chasis reconditioning" bit for you and then you rebuild the car?

No idea how much reconditioning work you need doing, but there may be people out there to do the work to a good standard for you. That way you've got the strip and rebuild part and not the grubby back-ache part.

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.