Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Bike carbs cheap on Ebay
Nick Skidmore

posted on 28/5/24 at 09:36 AM Reply With Quote
Bike carbs cheap on Ebay

A set of carbs, might be useful for someone to bag a bargain. Ex me.

https://www.ebay.co.uk/itm/335407074425

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User View All Posts By User U2U Member
russbost

posted on 29/5/24 at 07:16 AM Reply With Quote
Nick, I see you're providing rebuild kits with the carbs, are they absolutely complete &, to best of your knowledge, in decent condition. How much are you hoping to make of them?

Has anyone on here used these carbs on a 2L Pinto & how much hassle to fit & get running nicely - I obviously accept I need to make a suitable manifold





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Nick Skidmore

posted on 29/5/24 at 07:24 AM Reply With Quote
Bike Carbs

These are off a single seater that I built '95 to '98 and sold in 2002, I bought it back in December for old times sake to restore as I couldn't bear the thought of it being buggered about with. The last use was 2007 and it had been stored well so a strip clean and rebuild with that kit should see them fine. I ran on a set of borrowed FCR 39's back in the day so have bought a new set just for the sound..

Would like to see near 100 but make an offer, you can get moulded k+n filters for these, I may have a set you can have but they are crumpled by the roll bar stays..

[Edited on 29/5/24 by Nick Skidmore]

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User View All Posts By User U2U Member
russbost

posted on 29/5/24 at 07:30 AM Reply With Quote
I've only ever played with bike carbs on bike engines - would these be suitable for the 2L Pinto, did you run with an airbox or socks. what engine where they on?
Price? - PM me if you prefer

Cheers Russ





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Nick Skidmore

posted on 29/5/24 at 07:50 AM Reply With Quote
They ran on a Yamaha FZR 1000 Genesis which is an earier engine than the EXUP but spacing is the same. They woul just need a bit of set up, pilot jet does idle, slide needle does mid range and main jet WOT. Jets are std. Mikuni and freely available - I should have some in the spares which you can have. I'll pm you.

There are a moulded pair, 2 x 2 of k and n filters made for these, I may have them but a bit crumpled. They would best best, I used them in place of the air box.

[Edited on 29/5/24 by Nick Skidmore]

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.