A Nonny Mouse
|
| posted on 28/10/07 at 06:47 PM |
|
|
Photographs / Pics wanted of MK's with Full Roll Cages!!!
Hi to everyone!
Could people please post Photographs/Pics of their MK's with FULL ROLL CAGES please?
I am after some pics so I can figure out whether it's what I want or not, and what types people have!
Cheers,
M
|
|
|
|
|
matt.c
|
| posted on 28/10/07 at 07:00 PM |
|
|
Image deleted by owner
Image deleted by owner
[Edited on 28/10/07 by matt.c]
[img][/img]
[Edited on 28/10/07 by matt.c]
|
|
|
MK Charlie
|
| posted on 28/10/07 at 07:49 PM |
|
|
Not too sure how to post pics, but there is one in my archive
|
|
|
Avoneer
|
| posted on 28/10/07 at 08:21 PM |
|
|
Plenty on my site:
http://bitsablade.co.uk/thumbnails.php?album=12
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
alister667
|
| posted on 28/10/07 at 09:11 PM |
|
|
http://members.lycos.co.uk/alister667/
|
|
|
bj928
|
| posted on 28/10/07 at 09:40 PM |
|
|
not an MK but an idea for you, the chassis was a luego but its been modded a bit, didn't want the bars right at the edge like normal because of
access issues.
|
|
|
indykid
|
| posted on 28/10/07 at 10:43 PM |
|
|
i find bars at the edge help access. it gives you something to hang off.
i suppose it does depend how agile/rotund you are though.
i'm not sure if i have any big pictures of my cage in my archive. the front half's bolt on though, cos i couldn't decide if i wanted
a full cage at first. i much prefer it though
tom
|
|
|
snoopy
|
| posted on 29/10/07 at 07:01 AM |
|
|
lets go outside ?
.JPG)
.JPG)
|
|
|
PAUL FISHER
|
| posted on 29/10/07 at 07:02 PM |
|
|
mine
 
Rescued attachment cage.jpg
|
|
|
welderman
|
| posted on 30/10/07 at 07:55 AM |
|
|
What size tube are the cages made from?.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
andrews_45
|
| posted on 5/11/07 at 05:14 PM |
|
|
Hi, This is my MK Locost race car which has had a full cage fitted.
It is to MSA / FIA regs and was made/fitted by matt at Procomp. It is fully welded in and has side impact protection. If you are planning to ever
race in the future be carefull about the FIA/MSA regs, they are very specific about the Radius' on the tubing bends. I got caught out and had
to angle grind my original roll bar off, as I had planned to incorporate it into my full cage.
|
|
|
%20(WinCE).JPG)
