mad dad
|
posted on 17/7/08 at 05:02 PM |
|
|
SVA and fitting front cycle wings
Hi there a friend of mine has almost finished building his kit and was wondering if its ok to sikaflex the front cycle wings on or whether SVA
requires a bolted/screwes fitting....i am sure sticking is ok but can someone confirm for me....cheers and hope everyones ok....
|
|
|
James
|
posted on 17/7/08 at 05:04 PM |
|
|
Stuck mine down and passed.... don't believe I'm the only one!
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
coozer
|
posted on 17/7/08 at 05:05 PM |
|
|
My cycle wings are glued on as you say and I had my SVA on Tuesday.
No comment passed by the inspector.
Steve
1972 V8 Jago
1980 Z750
|
|
piddy
|
posted on 17/7/08 at 05:07 PM |
|
|
sticking them on is acceptable.
That is how all Dax Rushes are done.
|
|
mad dad
|
posted on 17/7/08 at 05:08 PM |
|
|
thanks everyone...out with the sikaflex it is then
|
|
DRC INDY 7
|
posted on 17/7/08 at 06:04 PM |
|
|
Mine are stuck on and had sva on wednesday noooooooo probs
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
snapper
|
posted on 17/7/08 at 09:02 PM |
|
|
I used perforated steel about 70mm deep by the width of the cycle wing with bolts brazed on then Sikaflexed the whole lot to the wing, Passed today.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|