Does anybody know the correct model/make of spark plug leads I would need for the pinto if i was to connect the unit where the dizzy was/is?

Thanks

the only off the shelf ones I know of with the right ends are the ones for the 1.3 / 1.6 fiesta / escorts (early 90's ones) and a few other cars - but if I remember right there where only 2 or 3 different sets for all of them
Thats assuming that you want the early coilpack type, with normal plug ends (not the big rubber boots for zetec's etc....)

I guess one of them will be about the right length (if not you can get them made up for you)

go down to you local motorfactors and see if you can look through/borrow there cataloge

[Edited on 6/12/08 by mcerd1]

[Edited on 6/12/08 by mcerd1]

all i can say is you need long ones, i have them on my pinto, as i have done exactly what you are wanting to do, i will go have a look what model they are are report back

moments later after a trip to the garage.

written on my leads are : Ford 097203 2F5 SE, im guessing this is the part number that you will need.

[Edited on 6/12/08 by omega0684]

quote:

---

Originally posted by omega0684
all i can say is you need long ones, i have them on my pinto, as i have done exactly what you are wanting to do, i will go have a look what model they are are report back

moments later after a trip to the garage.

written on my leads are : Ford 097203 2F5 SE, im guessing this is the part number that you will need.

[Edited on 6/12/08 by omega0684]

---

your welcome buddy, ;et us know how you get on