My donor is located some distance away, so I can't quickly check on this. How much room do I need to leave on the right side of the tunnel to allow space for the Type 9 reverse switch and connector that is located there? Ideally, if someone could tell me how far the connector sticks out from the tailshaft housing, this would allow me to make sure I leave enough room.

Thanks,
Shaun

Can't measure it either but this should give you an idea.

ATB



Speed Sensor

[Edited on 4/9/06 by pajsh]

Cheers, pajsh.

Sorry for the late reply; I've been travelling.

Shaun