Hi Chaps,

I was just wondering if anyone knows of a supplier for the suspension brackets and wishbones of the new Haynes roadster please?

Many thanks in advance.

Stewart

I think this very same question was asked a week or so ago, so maybe a quick use of the SEARCH function on this site may help, but I believe Martin Keenan is going to be making those brackets, but he isn't called MK Engineering anymore, according to this thread by Chris:
http://www.locostbuilders.co.uk/viewthread.php?tid=64352
it is now Road Runner Racing - and all details can be found on here.

hope this helps
Steve

[Edited on 12/4/07 by worX]

Hello,
Here we are

http://www.mkdevelopments.co.uk/roadsterpricelist.htm

Cheers
David

Many thanks for the replies chaps!

Thanks for going easy on the newbie - schoolboy error not to use the search function.

hi im doing mine at the moment i have used 50x50x3mm box section with one side cut out for the 44mm internal ones and 80x40x3mm cut down on the 80 side to 47mm which gives u the 34 internal size u need most structual steel places stock these sizes so u can get off cuts cheap, hope this helps

have a look at GTS Tuning, you might find what your looking for there